Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
-Ga
O
(001)Tsai, Y. H.*; Kobata, Masaaki; Fukuda, Tatsuo; Tanida, Hajime; Kobayashi, Toru; Yamashita, Yoshiyuki*
Applied Physics Letters, 124(11), p.112105_1 - 112105_5, 2024/03
Pt
Al
Ota, Kyugo*; Watabe, Yuki*; Haga, Yoshinori; Iesari, F.*; Okajima, Toshihiko*; Matsumoto, Yuji*
Symmetry (Internet), 15(8), p.1488_1 - 1488_13, 2023/07
Times Cited Count：1 Percentile：66.09(Multidisciplinary Sciences)Suzuki, Tomoya*; Otsubo, Ukyo*; Ogata, Takeshi*; Shiwaku, Hideaki; Kobayashi, Toru; Yaita, Tsuyoshi; Matsuoka, Mitsuaki*; Murayama, Norihiro*; Narita, Hirokazu*
Separation and Purification Technology, 308, p.122943_1 - 122943_7, 2023/03
Times Cited Count：2 Percentile：24.43(Engineering, Chemical)HNO leaching is used in recycling Pd metal from spent products that primarily contain Ag, and most Pd residues are separated from solutions containing Ag(I). However, a small amount of Pd(II) often remains in these Ag(I) solutions. Therefore, the separation of Pd(II) and Ag(I) in HNO solutions is essential to promote efficient Pd recycling. In this study, the separation of Pd(II) and Ag(I) in HNO solutions was investigated using four N-donor-type adsorbents functionalized with amine (R-Amine), iminodiacetic acid (R-IDA), pyridine (R-Py), or bis-picolylamine (R-BPA). R-Amine, R-IDA, and R-Py selectively adsorbed Pd(II) over Ag(I), Cu(II), Ni(II), and Fe(III) from HNO solutions (0.3-7 M), but R-Amine exhibited a lower Pd adsorption efficiency. In contrast, 
90% of Pd(II), Ag(I), and Cu(II) were adsorbed by R-BPA over the entire range of HNO concentrations. Structural analyses of the adsorbed metal ions using Fourier transform infrared spectroscopy and extended X-ray absorption fine structure spectroscopy revealed the separation mechanisms of the N-donor-type adsorbents. Pd(II) adsorption on R-IDA, R-Py, and R-BPA occurred via Pd(II) coordination of the functional groups (iminodiacetic acid, pyridine, and bis-picolylamine, respectively), whereas that on R-Amine occurred via anion exchange of NO
with [Pd(NO)
]
. The coordinative adsorption mechanisms resulted in the higher Pd(II) adsorption behaviors of R-IDA, R-Py, and R-BPA. HCl (5.0 M) and thiourea (0.1 M) eluents desorbed 83% of Pd(II) from R-IDA and 95% from R-Py, respectively. R-Py was the most effective Pd(II) adsorbent based on adsorption selectivity and desorption efficiency.
and CrUOAkiyama, Daisuke*; Kusaka, Ryoji; Kumagai, Yuta; Nakada, Masami; Watanabe, Masayuki; Okamoto, Yoshihiro; Nagai, Takayuki; Sato, Nobuaki*; Kirishima, Akira*
Journal of Nuclear Materials, 568, p.153847_1 - 153847_10, 2022/09
Times Cited Count：3 Percentile：68.71(Materials Science, Multidisciplinary)FeUO, CrUO, and Fe
Cr
UO are monouranates containing pentavalent U. Even though these compounds have similar crystal structures, their formation conditions and thermal stability are significantly different. To determine the factors causing the difference in thermal stability between FeUO and CrUO, their crystal structures were evaluated in detail. A Raman band was observed at 700 cm
in all the samples. This Raman band was derived from the stretching vibration of the O-U-O axis band, indicating that FeCrUO was composed of a uranyl-like structure in its lattice regardless of its "x"' value. M
ssbauer measurements indicated that the Fe in FeUO and FeCrUO were trivalent. Furthermore, FeCrUO lost its symmetry around Fe
with increasing electron densities around Fe, as the abundance of Cr increased. These results suggested no significant structural differences between FeUO and CrUO. Thermogravimetric measurements for UO, FeUO, and CrUO showed that the temperature at which FeUO decomposed under an oxidizing condition (approximately 800 
C) was significantly lower than the temperature at which the decomposition of CrUO started (approximately 1250 C). Based on these results, we concluded that the decomposition of FeUO was triggered by an "in-crystal" redox reaction, i.e., Fe 
U
Fe
U
, which would not occur in the CrUO lattice because Cr could never be reduced under the investigated condition. Finally, the existence of Cr in FexCrUO effectively suppressed the decomposition of the FeCrUO crystal, even at a very low Cr content.
states in CeFe revealed by soft X-ray magnetic circular dichroismSaito, Yuji; Yasui, Akira*; Fuchimoto, Hiroto*; Nakatani, Yasuhiro*; Fujiwara, Hidenori*; Imada, Shin*; Narumi, Yasuo*; Kindo, Koichi*; Takahashi, Minoru*; Ebihara, Takao*; et al.
Physical Review B, 96(3), p.035151_1 - 035151_5, 2017/07
Times Cited Count：3 Percentile：17.1(Materials Science, Multidisciplinary)We revisit the delocalized character of the 4
states of CeFe in the ferromagnetically ordered phase by X-ray magnetic circular dichroism (XMCD) in X-ray absorption spectroscopy (XAS) with improved data quality using single crystals. Surprisingly, the Ce 
XMCD spectral shape changes significantly as a function of temperature and applied magnetic field, with no concomitant changes in the spectral shape of the Ce XAS as well as the Fe 
XAS and XMCD. This unusual behavior is characterized by the 
states in a 4
configuration mixed into the 
ground state. Such extreme sensitivity of the Ce 4 states to the external perturbations can be related to the magnetic instability toward an antiferromagnetic phase in CeFe. Our experimental data presented here provide valuable insights into the underlying physics in strongly-hybridized ferromagnetic Ce compounds.
Baba, Yuji; Shimoyama, Iwao
Photon Factory Activity Report 2016, 2 Pages, 2017/00
In order to elucidate the adsorption states of radioactive Sr-90 in soil, chemical bonding states of non-radioactive strontium adsorbed on layered oxide (mica) have been investigated by X-ray photoelectron spectroscopy (XPS) and X-ray absorption near edge structure (XANES) spectroscopy. Since the number of atoms in radioactive Sr-90 is extremely small, the XPS and XANES were measured under total reflection condition of the incident X-rays. The detection limit in total reflection XPS was about 150 pg/cm
, which corresponds to 300 Bq of Sr-90. The Sr 2p
core-level energy in XPS shifted to lower energy with the decrease in the thickness of Sr layer. Also, the Sr 2p Sr 4d
resonance energy in XANES shifts to lower energy with the decrease in the thickness. On the basis of a simple point charge model, it was elucidated that the chemical bond between Sr and mica surface becomes ionic with the decrease in the adsorbed amount of strontium.
Matsuda, Yasuhiro*; Her, J.-L.*; Michimura, Shinji*; Inami, Toshiya; Ebihara, Takao*; Amitsuka, Hiroshi*
JPS Conference Proceedings (Internet), 3, p.011044_1 - 011044_6, 2014/06
Synchrotron X-ray absorption spectroscopy of CeRhSi has been performed in pulsed high magnetic fields of up to 32 T. The Ce valence is slightly larger than 3+ at 5 K and decreases with increasing magnetic above 20 T. The field-induced valence change seems to correspond to the metamagnetic transition in the magnetization process. This phenomena is similar to our previous result on CeRuSi and seems to be common in Ce-based heavy fermion compounds.
-irradiated graphite surfaces using photon-stimulated desorption spectroscopySekiguchi, Tetsuhiro; Baba, Yuji; Shimoyama, Iwao; Nath, K. G.
Surface and Interface Analysis, 38(4), p.352 - 356, 2006/04
Times Cited Count：3 Percentile：7.16(Chemistry, Physical)We investigated the orientation nature at the top-most layers of F-irradiated graphite using polarization dependent near-edge X-ray absorption fine structure (NEXAFS) spectroscopy which incorporates partial electron yield (PEY) detection and photon-stimulated ion desorption (PSID) techniques. The fluorine K-edge NEXAFS spectra conducted in PEY mode show no significant dependence on polarization angles. In contrast, NEXAFS spectra recorded in F ion yield mode show enhanced yields at a feature of 
689.4 eV assigned as a 
*(C-F) state relevant to =C-F sites, which depend on polarization angles. The C-F bonds prefer relatively tilting down the surface at the top-most layer, while the C-F bonds are randomly directed at deeper regions. We conclude that the difference in the orientation structures between the top surface and bulk is reflected in the NEXAFS recorded in the two different detection modes. It was also found that H- and F
- PSID NEXAFS spectra are helpful in understanding desorption mechanism, thus in analysing NEXAFS data.
Sekiguchi, Tetsuhiro; Baba, Yuji; Shimoyama, Iwao; Wu, G.*; Kitajima, Yoshinori*
Surface Science, 593(1-3), p.310 - 317, 2005/11
Times Cited Count：2 Percentile：11.66(Chemistry, Physical)Using a newly developed rotatable time-of-flight mass spectrometer(R-TOF-MS) and polarized synchrotron radiation, orientation effect on fragmentation and desorption pathways occurring at the top-most layers of molecular solids have been investigated. Reported will be polarization-angle dependencies of TOF mass spectra, high-resolution electron- and ion-NEXAFS in condensed chlorobenzene.
Ikeura, Hiromi*; Sekiguchi, Tetsuhiro; Baba, Yuji; Imamura, Motoyasu*; Matsubayashi, Nobuyuki*; Shimada, Hiromichi*
Surface Science, 593(1-3), p.303 - 309, 2005/11
Times Cited Count：5 Percentile：26.14(Chemistry, Physical)no abstracts in English
Otani, Eiji*; Suzuki, Akio*; Ando, Ryota*; Urakawa, Satoru*; Funakoshi, Kenichi*; Katayama, Yoshinori
Advances in High-Pressure Technology for Geophysical Applications, p.195 - 209, 2005/09
This paper summarizes the techniques for the viscosity and density measurements of silicate melt and glasses at high pressure and temperature by using the X-ray radiography and absorption techniques in the third generation synchrotron radiation facility, SPring-8, Japan. The falling sphere method using in situ X-ray radiography makes it possible to measure the viscosity of silicate melts to the pressures above 6 GPa at high temperature. We summarize the details of the experimental technique of the viscosity measurement, and the results of the measurements of some silicate melts such as the albite and diopside-jadeite systems. X-ray absorption method is applied to measure the density of the silicate glasses such as the basaltic glass and iron sodium disilicate glass up to 5 GPa at high temperature. A diamond capsule, which is not reactive with the glass, is used for the density measurement of the glasses. The present density measurement of the glasses indicates that this method is useful for measurement of the density of silicate melts at high pressure and temperature.
)SiX (X = F, Cl, Br, I, NCO) as studied using NEXAFS spectroscopySekiguchi, Tetsuhiro; Baba, Yuji; Shimoyama, Iwao; Nath, K. G.*; Uddin, M. N.*
Journal of Physics; Condensed Matter, 17(36), p.5453 - 5466, 2005/09
Times Cited Count：1 Percentile：6.23(Physics, Condensed Matter)The orientation nature of multilayer organosilicon compounds has been investigated by measuring the dependence of the Si K-shell near-edge X-ray absorption fine structures (NEXAFS) on the polarization angle. Two approaches helped to elucidate the orientation mechanism: the substitution effect and the deposition-rate dependence. The orientation angles of Si-X bond axes were obtained for trimethylsilyl halides, (CH)SiX (X =F Cl Br I NCO, condensed on Cu(111) at a low (82 K) temperature: the angles are 60, 73, 61, 55, and 55 degrees with respect to the surface normal, for X =F, Cl, Br, I, and NCO, respectively. Chloride (X =Cl) produces the most parallel tilt angle. The specific orientation nature of chloride is attributed to its strong dipole moment as well as the regular tetrahedron shape of the molecule. The molecular volumes calculated verify this view. Furthermore, deposition rates are found to greatly influence the growth manner: namely, high deposition rates led to a slightly perpendicular orientation of Si-X bond axis.
Konishi, Hiroyuki; Yamashita, Masato*; Uchida, Hitoshi*; Mizuki, Junichiro
Proceedings of 16th International Corrosion Congress (CD-ROM), 6 Pages, 2005/09
XANES measurements of rust layers formed on Fe, Fe-Cr alloys and Fe-Ni alloys exposed to a Cl-rich atmosphere have been performed using synchrotron radiation in order to clarify the relation between the structural properties of the rust layer on weathering steel and anticorrosive alloying elements and/or chloride ions. The XANES spectra around Cl K-edge revealed that the rust layer on the Fe-based binary alloys contains unidentified chloride in addition to akagan
iteite. The Fe K-edge XANES results indicated that the rust layers are composed mainly of well-known iron oxides, goethite, akaganite, lepidocrocite and magnetite. In particular, the mole ratio of akaganite in the rust layers on the Fe-Ni alloys is relatively higher than that of the Fe-Cr alloys. The Cr K-edge XANES spectra of the rust layers on the Fe-Cr alloys depends on the Cr alloy content. Therefore, the local structure of Cr in the rust layer is variable with the Cr density. In contrast, the Ni K-edge XANES results show that the local structure of Ni in the rust layer are unique in a certain Ni content range.
SbTe
thin films; An X-ray absorption studyFons, P.*; Kolobov, A.*; Tominaga, Junji*; Katayama, Yoshinori
Nuclear Instruments and Methods in Physics Research B, 238(1-4), p.160 - 162, 2005/08
Times Cited Count：5 Percentile：41.08(Instruments & Instrumentation)Super-resolution (SR) media offer up to a factor of ten increase in areal storage density over conventional DVD media. Although SR has been realized, there is a strong need for a deeper understanding of structural and electronic changes in GeSbTe (GST), a principal optical memory component, with external perturbations. Recording of SR disks leads to the formation of gas-phase bubbles that in turn lead to the development of large stresses on the underlying GST layer. In this paper we report on XAFS of nominally hydrostatic (0-10 GPa) compressive stress-induced structural changes of the metastable crystalline phase of GST. An analysis showed that the initial splitting of Ge Te bond lengths of the room-temperature distorted rocksalt structure decreased to a small but finite splitting for 
6 GPa. The implications of this upon the proposed ferroelectric catastrophe super-RENS readout mechanism are discussed.
Nath, K. G.; Shimoyama, Iwao; Sekiguchi, Tetsuhiro; Baba, Yuji
Journal of Electron Spectroscopy and Related Phenomena, 144-147, p.323 - 326, 2005/06
Times Cited Count：5 Percentile：27.35(Spectroscopy)The effect of laser annealing on electronic atructures and molecular orientation for poly(dimethylsilane), {PDMS, [Si(CH)]
} has been studied by synchrotron radiation photoemission and photoabsorption spectroscopy. Prior to annealing, PDMS powder was mounted on the basal plane of highly oriented pyrolytic graphite. Both Si 1s X-ray photoemission spectroscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy at Si 1s edge show that electronic structures have been modified due to annealing. Furthermore, the angle-dependent NEXAFS spectra clearly indicate that the annealed products maintain a specific orientation. Interestingly, no such kind of orientation is present in as-received PDMS powder as no angle-dependency is observed before annealing.
Konishi, Hiroyuki; Yamashita, Masato*; Uchida, Hitoshi*; Mizuki, Junichiro
Materials Transactions, 46(2), p.329 - 336, 2005/02
Times Cited Count：28 Percentile：80.42(Materials Science, Multidisciplinary)Chloride in atmosphere considerably reduces the corrosion resistance of conventional weathering steel containing a small amount of Cr. Ni is an effective anticorrosive element for improving the corrosion resistance of steel in a Cl-rich environment. In order to clarify the structure of the protective rust layer of weathering steel, Cl and Fe K-edge X-ray absorption near edge structure (XANES) spectra of atmospheric corrosion products (rust) formed on Fe, Fe-Ni and Fe-Cr alloys exposed to Cl-rich atmosphere were measured. The Fe K-XANES measurements enable the characterization of a mixture of iron oxides such as rust. The chemical composition of the rust was determined by performing pattern fitting of the measured spectra. All the rust is composed mainly of goethite, akaganite, lepidocrocite and magnetite. Among these iron oxides, akaganite in particular is the major component in the rust. Additionally, the amount of akaganite in the rust of Fe-Ni alloy is much greater than that in rust of Fe-Cr alloy. Akaganite is generally considered to facilitate the corrosion of steel, but our results indicate that akaganite in the rust of Fe-Ni alloy is quantitatively different from that in rust of Fe-Cr alloy and does not facilitate the corrosion of steel. The shoulder peak observed in Cl K-XANES spectra reveals that the rust contains a chloride other than akaganite. The energy of the shoulder peak does not correspond to that of any well-known chlorides. In the measured spectra, there is no proof that Cl, by combining with the alloying element, inhibits the alloying element from acting in corrosion resistance. The shoulder peak appears only when the content of the alloying element is lower than a certain value. This suggests that the generation of the unidentified chloride is related to the corrosion rate of steel.
Konishi, Hiroyuki; Yamashita, Masato*; Uchida, Hitoshi*; Mizuki, Junichiro
Materials Transactions, 45(12), p.3356 - 3359, 2004/12
Times Cited Count：10 Percentile：50.63(Materials Science, Multidisciplinary)Cl K-edge XANES measurements of atmospheric corrosion products (rust) formed on Fe, Fe-Ni and Fe-Cr alloys in chloride pollution have been performed using synchrotron radiation in order to clarify roles of anticorrosive alloying elements and of Cl in the corrosion resistance of weathering steel. The spectra of binary alloys show a shoulder structure near the absorption edge. The intensity of the shoulder peak depends on the kind and amount of the alloying element, whereas the energy position is invariant. This indicates that Cl is not combined directly with alloying elements in the rust.
hole-assisted electronic processes in the PrSrMnO (x=0.0, 0.3) systemIbrahim, K.*; Qian, H. J.*; Wu, X.*; Abbas, M. I.*; Wang, J. O.*; Hong, C. H.*; Su, R.*; Zhong, J.*; Dong, Y. H.*; Wu, Z. Y.*; et al.
Physical Review B, 70(22), p.224433_1 - 224433_9, 2004/12
Times Cited Count：29 Percentile：75.08(Materials Science, Multidisciplinary)no abstracts in English
-edges of Tb
FeCo
perpendicular magnetization filmsAgui, Akane; Mizumaki, Masaichiro*; Asahi, Toru*; Sayama, Junichi*; Matsumoto, Koji*; Morikawa, Tsuyoshi*; Nakatani, Takeshi; Matsushita, Tomohiro*; Osaka, Tetsuya*; Miura, Yoshimasa*
Transactions of the Magnetics Society of Japan, 4(4-2), p.326 - 329, 2004/11
The electronic and spin state of the perpendicular magnetization film TbFeCo was investigated by means of magnetic circular dichroism spectroscopy for each element. The samples are TbFeCo while the ratio of a rare-earth metal Tb to transition metals Fe and Co is constant, the composition ratio of Fe and Co is changed. Changing the ratio, we estimated the expected orbital moments 
of Tb 4f electrons. The macroscopic magnetic property is studied from the microscopic point of view.
Yokoya, Akinari; Takakura, Kaoru*; Watanabe, Ritsuko; Akamatsu, Ken*; Ito, Takashi*
Radiation Research, 162(4), p.469 - 473, 2004/10
Times Cited Count：3 Percentile：10.08(Biology)X-ray absorption spectra from single crystals of 5-Bromouracil were measured with the transmission mode in the energy range from 13.41 to 13.50 keV using the linearly polarized synchrotron radiation (SR). A characteristic resonance structure, consisting of four peaks, was recognized in the spectra in the Br K-edge region. The intensities of these peaks were strongly dependent on the crystal rotation about the normal of the crystal b-c plane, which was set perpendicular to the X-ray beam direction. (SR X-rays are polarized in the horizontal plane.) Molecular orbital calculations indicate that these resonance peaks are associated with the transitions from the 1s electron of Br to the Br-C molecular antibonding orbitals and to a shape resonance. The observed anisotropy of each photoabsorption peak might originate from the angular dependences of these molecular orbitals.
